4 Reasons Whirlpool Washer Will Not Complete Final Spin

If your Whirlpool washer won’t complete its final spin cycle, it can be incredibly frustrating. The good news is that there are a variety of potential causes and solutions that can help you get your washer back on track. Let’s take a look at four of the most common reasons why your Whirlpool washer won’t complete its final spin cycle. 

1. Blocked Drain Pump or Hose 

If your drain pump or hose is blocked, then water will not be able to leave the washer during the spin cycle. This will result in an unbalanced load, which will cause the washer to shut off before it completes the cycle. To check for a blockage, inspect both your drain hose and drain pump for any debris or clogs. You can also try running a small amount of water through the hose to check for any blockages or leaks. 

2. Worn Out Belts 

Worn out belts can cause considerable friction when spinning, resulting in an unbalanced load and failed spin cycles. Inspecting and replacing worn out belts is easy enough if you have some basic mechanical knowledge and tools available to you. However, if you don’t feel comfortable doing this work yourself, then it may be best to contact a professional repair technician who specializes in Whirlpool washers. 

3. Faulty Motor 

If none of the other components appear to be causing issues with your washer's spin cycle, then there could be an issue with the motor itself. A faulty motor could prevent your washer from completing its spin cycle due to lack of power or torque being produced by the motor itself. In this case, it might make more sense to replace your entire motor rather than trying to repair it yourself or hiring someone else to do so. 

4. Malfunctioning Lid Switch 

A malfunctioning lid switch can prevent your washer from completing its spin cycle since this component is responsible for sensing whether or not the lid is securely closed before allowing power to flow through the machine's various components during operation. If you suspect this may be causing issues with your machine's performance, then you should replace your lid switch as soon as possible in order to prevent further damage from occurring within other parts of your washing machine system over time due to prolonged use without proper functioning safety measures in place (such as a fully functional lid switch). 

Conclusion: 

It’s important that you understand what might be causing issues with your Whirlpool Washer when it won't complete its final spin cycle so that you can properly address them quickly and efficiently before further damage occurs within other parts of your washing machine system over time due to prolonged use without proper functioning safety measures in place (such as a fully functional lid switch). Fortunately, there are several potential causes that have easy fixes such as blocked drain pumps/hoses, worn out belts, faulty motors and malfunctioning lid switches that are all relatively simple repairs if addressed correctly by either yourself or an experienced professional repair technician who specializes in Whirlpool Washers specifically!